- #Nyc supported scaffold inspection checklist code#
- #Nyc supported scaffold inspection checklist professional#
#Nyc supported scaffold inspection checklist professional#
When you need to hire a Licensed Contractor to obtain a permitĪ Licensed Contractor may design and perform the following work without the owner first hiring a Registered Design Professional to prepare and submit construction plans for approval by the Department. Suspended Scaffold: A permit is not required for a two-point suspended scaffold suspended from a parapet using C-hooks a scaffold installed and used in conjunction with a project that holds a valid permit, where the site is closed to the public and enclosed within a fence in accordance with Section BC 3307 and the installation, use, and removal of the scaffold is confined within the site or over an area protected by sidewalk sheds or roof protection.
Supported Scaffold: A supported scaffold that is less than 40 feet in height not an outrigger scaffold without any hoisting equipment over2000 pound capacity and is not designed to be loaded over 75 pounds per square foot, does not need a permit. Per BC 3314.2, a Scaffold shall not require permits if: Emergency work, as it relates to Scaffolding projects, may include but not be limited to stabilization of unsafe structural conditions. However, the application for a permit shall be submitted within two (2) business days after the commencement of the emergency work, perform required inspections to close out the project, and shall include a written description of the emergency condition and the measures undertaken to mitigate the hazard.
#Nyc supported scaffold inspection checklist code#
Licensed Contractors may perform emergency work without initially getting a permit. NYC Administrative Code Section AC 28-105.4.1 clarifies ‘emergency work’ as that would otherwise require a permit, but may be performed without a permit to the extent necessary to relieve an emergency condition. Unless otherwise indicated, permits shall not be required for the following:ĭesign and Permit Requirements, as set forth in BC 3314.2 Such exemptions shall not relieve owners of the obligation to comply with the requirements of other city agencies, including any filing requirements. Exemptions from permit requirements of this code shall not be deemed to grant authorization for work to be done in any manner that violates the provisions of the code, including the zoning resolution or any other law or rules enforced by the Department. The NYC Administrative Code §28-105.4.5 clarifies work exempt from permit. There is some minor work, described below, that can be performed without a work permit, without hiring a Licensed Contractor, and/or without hiring a Registered Design Professional. Get a printable version.Work you can do without a permit, Licensed Contractor, or Registered Design Professional Certification: At the completion of the project and following removal of the installation, Applicant may submit a certificate of removal, which may be audited.Post Approval Amendments: If the approved work has substantive or significant changes, make sure to submit revised drawings and obtain a Post Approval Amendment (PAA). Mayor Office for People with Disabilities (MOPD).Required Documents: Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit.
Pre-Permit & On-going Project Work Checklist Pre-Permit Although the Registered Design Professionals are only required to show the final construction documents, the Applicant of Record should stamp and sign all formal submittals to the Department to demonstrate he/she has exercised responsible charge as required.Based on the project scope of work, include all applicable Special/Progress Inspections and commissioning statement.Show fire-rated walls on all architectural, mechanical, and electrical, which will facilitate the plan review process.These will speed up the plan review process for repairs by reducing comments and the number of back forth and checks. Provide ‘reference only’ documents of legal existing conditions.Pre-Permit & On-going Project Work Checklist.Prior to Application Approval Checklist.This section contains a list of tasks that provide compliance with the Construction Codes and other regulations discussed in the Project Guidelines. Although there may be some specific projects that do not involve architectural or structural work, which may be completed by other professionals, it is important that the RDP maintain control of the entire project. Regardless of how the project work is portioned out, administration of the work remains the responsibility of the Registered Design Professional (RDP) who is the Applicant of Record (Applicant) in responsible charge or has verified Code and Zoning compliance of the drawings and installations for the project.
0 kommentar(er)
